Portable Trimline Specs

Trimline TIC Series Ordering Information

Nominal Panel Height (Inches)	Panel-toP anel Depth (Inches)	19 Inch Panel Widths Model No.	15 5/8 Inch Panel Widths Model No.	9 1/2 Inch Panel Widths Model No.
3 1/2	13	TIC-031913	TIC-031513
7			TIC-071513	TIC-070913
10 1/2	13	TIC-101913	TIC-101513	TIC-100913
12 1/4	13	TIC-121913
17 1/2	13	TIC-171913		TIC-170913
21	18			TIC-210913
5 1/4	17	TIC-051917
7	17	TIC-071917
8 3/4	17	TIC-081917
10 1/2	17	TIC-101917
12 1/4	17	TIC-121917	TIC-141517
14	17	TIC-141917
17 1/2	17	TIC-171917
21	17	TIC-211917
24 1/2	17	TIC-241917
28	17	TIC-281917
5 1/4	21	TIC-051921
7	21	TIC-071921
10 1/2	21	TIC-101921
12 1/4	21	TIC-121921
17 1/2	21	TIC-171921
21	21	TIC-211921
24 1/2	21	TIC-241921
28	21	TIC-281921

Distinctive Instrument Enclosures

High in quality and distinction, moderate in cost Trimline instrument cases, with their extraordinary strength, beauty and utility, are designed to meet the engineering and marketing design requirements for electronic products packaging for free standing or rack mounted instrumentation or systems.

TIC cases are trimmed front and rear with anodized, extruded aluminum and decorative vinyl inlays. Lightweight strength and rigidity is achieved through the use of multiple offset and angle forming of 20 gauge C/R steel interlocked and welded to the 4-16 gauge channel corner post sections used for reinforcement and equipment mounting accommodations. Provisions for equipment mounting permit the ready use of the following accessories:
tilt-stand, front and rear panels, slides, rack adapters, chassis and shelf support angles, and access doors with or without locks. Ventilation provisions and other modifications are readily available at nominal cost.

The large variety of sizes, the adaptability for equipment mounting requirements, the variety of finishes and the ready availability at modest costs make the Trimline Series of cases an ideal choice for electronic product packaging.

Modifications

Requirements for special ventilation, screening, cutouts, access openings, etc. should be submitted for quotation.

Special Sizes

A special design size (15 5/8 inch panel width) has been incorporated into the Trimline instrument case line which makes the entire case easily adaptable into standard 19 inch rack systems. The overall case width accommodates rack adapters to fit cleanly into 19 inch rack widths. The overall case height conforms to standard panel heights, requiring no fillers to adjacent panels above or below the Trimline Case. This design size is especially desirable for bench or desk instrumentation that may be rack mounted without requiring a different sized enclosure for each usage.