|
To Fit Standard 19" Wide Panel Space
These blowers provide maximum cooling with
minimum space requirements at a low noise level with minimum vibration. Panel mounting provisions are for EIA standard 19 inch panel spacing. Permanently lubricated ball bearing motors with lubricant temperature range from -20oC to +148oC, operate on 115 volt,
50/60 cycle, AC, single phase current. Permanent type washable filter is easily removable from the front. Chrome plated grille is supplied with 2 captive thumb nuts. Performance data prepared by an impartial, independent
testing laboratory is available on request. Base recessed blowers are available on special order.
|
