Blank Panels

Standard Panel Layout For All PREMIER Panels

Blank Rack Panels — 9 1/2, 19, 24 and 30 Inch Widths

Premier Blank Panels are available in either aluminum or steel. All panels have closed slots for rigidity with spacing according to EIA standards. Open slots available on special order. Note that all panels are cut 1/32 inch less than nominal height indicated in ordering tables. Finished in any Premier standard colors.

Masked Aluminum Panels are made of bright natural aluminum covered on both sides with special self-adhesive paper. Drilling or milling can be done on paper in place, affording complete damage protection. Paper is removed simply by peeling.

Modifications are available, including unfinished, special finishes and special heights.

Aluminum Panels*

9 1/2 Inches Wide

Aluminum and Steel Panels

24 Inches Wide

Nominal Height (Inches)	Catalog Number
1 3/4	ARP-195
3 1/2	ARP-395
5 1/4	ARP-595
7	ARP-795
8 3/4	ARP-895
10 1/2	ARP-1095
12 1/4	ARP-1295
14	ARP-1495


	*Made of 1/8 Inch Thick Aluminum

Nominal Height (Inches)	1/8 Inch Thick Aluminum Catalog Number	12-Gauge Steel Catalog Number
3 1/2	ARP-324	RP-324
5 1/4	ARP-524	RP-524
7	ARP-724	RP-724
8 3/4	ARP-824	RP-824
10 1/2	ARP-1024	RP-1024
12 1/4	ARP-1224	RP-1224
14	ARP-1424	RP-1424
15 3/4	ARP-1524	RP-1524
17 1/2	ARP-1724	RP-1724
21	ARP-2124	RP-2124

Masked Aluminum Panels

19 Inches Wide

Nominal Height (Inches)	1/8 Inch Thick Aluminum Catalog Number	3/16 Inch Thick Aluminum Catalog Number
1 3/4	MAP-119	MAP-119-36
3 1/2	MAP-319	MAP-319-36
5 1/4	MAP-519	MAP-519-36
7	MAP-719	MAP-719-36
8 3/4	MAP-819	MAP-819-36
10 1/2	MAP-1019	MAP-1019-36
12 1/4	MAP-1219	MAP-1219-36
14	MAP-1419	MAP-1419-36
15 3/4	MAP-1519	MAP-1519-36
17 1/2	MAP-1719	MAP-1719-36
19 1/4	MAP-1919	MAP-1919-36
21	MAP-2119	MAP-2119-36
26 1/4	MAP-2619	MAP-2619-36
31 1/2	MAP-3119	MAP-3119-36
35	MAP-3519	MAP-3519-36

Aluminum and Steel Panels

30 Inches Wide*

Nominal Height (Inches)	1/8 Inch Thick Aluminum Catalog Number	12-Gauge Steel Catalog Number
3 1/2	ARP-330	RP-330
5 1/4	ARP-530	RP-530
7	ARP-730	RP-730
8 3/4	ARP-830	RP-830
10 1/2	ARP-1030	RP-1030
12 1/4	ARP-1230	RP-1230
14	ARP-1430	RP-1430
15 3/4	ARP-1530	RP-1530
17 1/2	ARP-1730	RP-1730
21	ARP-2130	RP-2130


	*Special Order

Special Panels

For 155/8 Inch TIC Series Cases

These panels are finished in Light Gray. 1/8 inch aluminum panels are 155/8 wide. Heights are slotted for standard EIA and WE spacing. Made for use with special design width of TIC instrument case.

Height (Inches)	Catalog Number
3 1/2	ARP-315
5 1/4	ARP-515
7	ARP-715
8 3/4	ARP-815
10 1/2	ARP-1015
12 1/4	ARP-1215

Painted Aluminum and Steel Panels


	19 Inches Wide

Nominal Height (Inches)	1/8 Inch Thick Aluminum Catalog Number	3/16 Inch Thick Aluminum Catalog Number	12-Gauge Steel Catalog Number
1 3/4	ARP-119	ARP-119-36	RP-119
3 1/2	ARP-319	ARP-319-36	RP-319
5 1/4	ARP-519	ARP-519-36	RP-519
7	ARP-719	ARP-719-36	RP-719
8 3/4	ARP-819	ARP-819-36	RP-819
10 1/2	ARP-1019	ARP-1019-36	RP-1019
12 1/4	ARP-1219	ARP-1219-36	RP-1219
14	ARP-1419	ARP-1419-36	RP-1419
15 3/4	ARP-1519	ARP-1519-36	RP-1519
17 1/2	ARP-1719	ARP-1719-36	RP-1719
19 1/4	ARP-1919	ARP-1919-36	RP-1919
21	ARP-2119	ARP-2119-36	RP-2119
26 1/4	ARP-2619	ARP-2619-36	RP-2619
31 1/2	ARP-3119	ARP-3119-36	RP-3119
35	ARP-3519	ARP-3519-36	RP-3519